ZESTLET · OEM / ODM · Private Label
Softshell Base-Layer Gloves: 6 Problems with Layering, Grip Print and Cuffs
Build Now, Pay Later · New brands welcome
Launch your brand from 20 pieces. Pay the balance after your stock arrives.
ZESTLET makes your tactical, hunting, uniform and Highland products under your own label. Your first sample and branding setup are free, and orders from $5,000 can pay 60% after delivery.
Budget under $5,000
Startup Launch
- Start from 20 pieces per product
- Your first sample is free
- Labels, screens and digitising are free
- Bulk starts only after you approve the sample
Orders from $5,000
Build Now, Pay Later
- Pay 40% to start production
- Pay the other 60% monthly after delivery
- No interest and no application fee
- Your limit grows with every on-time payment
Your full journey with ZESTLET, step by step
From your first idea to stock in your warehouse. Every step is visible in your free brand dashboard.
- 1Create your free brand accountSign up in about one minute. We email you a 6-digit code to confirm your account.
- 2Check your credit in 30 secondsAnswer 3 short questions in your dashboard and see your pre-qualified credit limit straight away.
- 3Start your projectUpload your design or tech pack, choose the product and quantity. You can start from 20 pieces per product.
- 4Get your quotation within 24 hoursPrice per piece, lead time and payment terms in writing, from real people in Sialkot.
- 5Free sample with your brandingWe make your sample with your logo in 7–10 working days. You only pay the sample shipping.
- 6Approve and pay 40%Bulk production starts only after you approve the sample and pay the 40% deposit.
- 7Production and quality checksCutting, stitching, inspection and packing, with progress updates in your dashboard.
- 8Delivery, then pay 60% monthlyDoor-to-door shipping. Credit orders pay the balance after delivery over 90 to 365 days, with no interest.
What you need to apply
- Your brand name and contact details
- Your product idea, design or tech pack
- An order value from $5,000 for Build Now, Pay Later
- For higher limits: sales history or business registration
Your credit limit grows with you
First credit order
After 2 orders paid on time
After 4 cycles and a review
- Deposit
- 40%
- Balance after delivery
- 60%, monthly
- Repayment
- 90 to 365 days
- Interest and fees
- None
Can I start a clothing brand with a small budget?
Yes. You can start from 20 pieces per product, and your first sample and branding setup are free, so your budget goes into product.
Who can use Build Now, Pay Later?
Brands with orders from $5,000, including new brands with no sales history, after a short review. You pay 40% upfront and 60% in monthly instalments after delivery.
Is the sample free?
Yes, the first sample is made free with your branding. Sample shipping is paid by the buyer.
Credit is subject to approval. Amounts shown in your local currency are approximate.

A base-layer glove has a difficult job: it must be thin enough to fit inside another glove without bunching, yet still give a secure, comfortable fit at the fingers, palm and wrist. The ZESTLET Softshell Base-Layer Gloves are a sewn glove with a black stretch textile palm carrying small grip-print dots, a low-bulk black softshell-style back with an optional fine fleece inner face, full closed fingers with a sewn thumb, and a plain turnback cuff with a small carrier loop and no wrist strap. Unlike a knitted liner, this glove is cut and sewn from fabric, which brings its own set of problems. Here are the ones brand owners and buyers meet most often, and how to prevent them at the sample stage.

1. The liner does not fit inside the outer glove
A base layer that feels perfect on the bare hand can be too long in the fingers, or too bulky at the seams, once it is inside the outer glove your customers actually use. Excess fingertip length folds over and creates pressure points. Always fit the liner inside the real outer glove during sampling, and check finger length, seam pressure and thumb movement with both gloves on.
2. Seams that press when layered
Sewn gloves have seams on the fingers and around the thumb. On their own they are rarely noticed, but under a tight outer glove a thick or badly placed seam can rub. Agree seam positions and seam allowances on the approved sample, and ask the wearer to close the hand around a handle with both layers on.
3. Grip print that peels, cracks or sticks
The grip-print dots on the palm are a visible selling point, but print is also where most quality complaints start. Ink that is not right for the stretch textile can crack when the hand flexes or lift after washing. Print can also grip the inside of the outer glove too much, making it hard to take the outer glove off. The product record leaves the print chemistry, coverage and adhesion to sample approval, so trial the print against the handle and against the outer-glove lining, and confirm adhesion and care after washing before bulk.
4. Cuffs that fight each other
The plain turnback cuff has no strap, which keeps it slim. The question is how it meets the outer glove’s cuff and the jacket sleeve. If the two cuffs overlap awkwardly, there is a cold gap or a bulky ridge at the wrist. Check that the cuffs overlap comfortably on the smallest and largest sizes in your range.
5. Fleece face that changes the size
The fine fleece inner face is optional and is chosen at material approval. Adding it makes the glove feel softer but also slightly fuller, so a size chart approved without fleece may feel tight with it. Decide on the fleece before the size chart is final, and keep the approved textile swatch as a reference for bulk.
6. Claims the product does not support
Softshell fabrics are often associated with wind or water resistance, and black gloves are often sold as touchscreen-compatible. The product record for this design states that no touchscreen or weatherproof performance is assumed, and the illustrated components do not establish protective performance. Do not print these claims unless you have arranged and approved the testing behind them.
Sample checklist for softshell base-layer gloves
| Check | What to confirm on the physical sample |
|---|---|
| Layering | Fits inside the intended outer glove without folds at the fingertips |
| Seams | No pressure points with both layers on |
| Grip print | Adhesion after flexing and washing; acceptable friction against the outer glove |
| Cuff | Comfortable overlap with outer glove and sleeve |
| Fleece face | Decision made before the size chart is approved |
| Labels and claims | No touchscreen or weatherproof wording without testing |
| Packaging | Pair bag, hang card, barcode and carrier loop use agreed |
If you are comparing with knitted liners, see glove liner problems with bunching, fit and cuffs. To choose fabric, grip print and sizes, read our softshell base-layer gloves buyer’s guide, and to follow each production step, read how softshell base-layer gloves are made.
Develop softshell base-layer gloves for your brand
ZESTLET is a glove and apparel manufacturer in Sialkot, Pakistan, working with brand owners, shops and distributors on private-label products.
- Small batches welcome
- Physical sample first, bulk production only after your approval
- Your labels, hang cards, pair bags and carton marks
- Textile, grip print, cuff and size chart agreed in writing
See the Softshell Base-Layer Gloves or request a quotation with your brief.
FAQ
Why does my liner glove bunch inside the outer glove?
Usually the fingers are too long or the seams too bulky for that outer glove. Fit the liner inside the actual outer glove during sampling and adjust finger length and seam positions.
Will the grip dots peel off after washing?
That depends on the print chemistry, coverage and adhesion, which are approved on the sample. Trial the print, wash the sample as your customers will, and check adhesion before approving bulk.
Are these gloves touchscreen compatible or waterproof?
No touchscreen or weatherproof performance is assumed for this design. Any such feature would need to be specified, tested and documented separately.
What is the carrier loop for?
The small carrier loop at the cuff is part of the design; how it is used in packing and display, for example to keep a pair together, is agreed with you.
What should I send for a quotation?
Send your drawing, intended task, material preference, size breakdown, quantity, destination and authorised artwork. Sample cost, MOQ, lead time, packaging and freight are confirmed in the written quotation.
