ZESTLET · OEM / ODM · Private Label

Knitted Glove Liners: 7 Common Problems (Bunching, Tight Outer Gloves, Cuffs, Pilling) and How to Avoid Them

Build Now, Pay Later · New brands welcome

Launch your brand from 20 pieces. Pay the balance after your stock arrives.

ZESTLET makes your tactical, hunting, uniform and Highland products under your own label. Your first sample and branding setup are free, and orders from $5,000 can pay 60% after delivery.

Budget under $5,000

Startup Launch

  • Start from 20 pieces per product
  • Your first sample is free
  • Labels, screens and digitising are free
  • Bulk starts only after you approve the sample

Orders from $5,000

Build Now, Pay Later

  • Pay 40% to start production
  • Pay the other 60% monthly after delivery
  • No interest and no application fee
  • Your limit grows with every on-time payment

Your full journey with ZESTLET, step by step

From your first idea to stock in your warehouse. Every step is visible in your free brand dashboard.

  1. 1Create your free brand accountSign up in about one minute. We email you a 6-digit code to confirm your account.
  2. 2Check your credit in 30 secondsAnswer 3 short questions in your dashboard and see your pre-qualified credit limit straight away.
  3. 3Start your projectUpload your design or tech pack, choose the product and quantity. You can start from 20 pieces per product.
  4. 4Get your quotation within 24 hoursPrice per piece, lead time and payment terms in writing, from real people in Sialkot.
  5. 5Free sample with your brandingWe make your sample with your logo in 7–10 working days. You only pay the sample shipping.
  6. 6Approve and pay 40%Bulk production starts only after you approve the sample and pay the 40% deposit.
  7. 7Production and quality checksCutting, stitching, inspection and packing, with progress updates in your dashboard.
  8. 8Delivery, then pay 60% monthlyDoor-to-door shipping. Credit orders pay the balance after delivery over 90 to 365 days, with no interest.

What you need to apply

  • Your brand name and contact details
  • Your product idea, design or tech pack
  • An order value from $5,000 for Build Now, Pay Later
  • For higher limits: sales history or business registration

Your credit limit grows with you

Starter$5,000 – $15,000
First credit order
Growth$15,000 – $50,000
After 2 orders paid on time
Scale$50,000+
After 4 cycles and a review
Deposit
40%
Balance after delivery
60%, monthly
Repayment
90 to 365 days
Interest and fees
None
Can I start a clothing brand with a small budget?

Yes. You can start from 20 pieces per product, and your first sample and branding setup are free, so your budget goes into product.

Who can use Build Now, Pay Later?

Brands with orders from $5,000, including new brands with no sales history, after a short review. You pay 40% upfront and 60% in monthly instalments after delivery.

Is the sample free?

Yes, the first sample is made free with your branding. Sample shipping is paid by the buyer.

Credit is subject to approval. Amounts shown in your local currency are approximate.

Knitted glove liners are worn under work gloves, winter shells and tactical gloves, or on their own for light tasks. They look like the easiest glove in a range: one charcoal knit, close-fitting fingers and a rib cuff. Yet liners cause a surprising number of complaints, because they never work alone. A liner that feels fine on the hand can bunch at the fingertips inside the outer glove, push the outer glove too tight or slide down at the cuff. This guide covers the problems buyers meet most often with knitted liners and how to prevent them before bulk.

Charcoal full-finger knitted glove liner design with close-fitting fingers and rib cuffs. Specify yarn composition, knit density and fit under the intended outer glove before sampling.
Charcoal full-finger knitted glove liner design with close-fitting fingers and rib cuffs. Specify yarn composition, knit density and fit under the intended outer glove before sampling.

To choose yarn, knit density and sizes, read our Knitted Glove Liners Buyer’s Guide. To see how liners are knitted and checked, read How Knitted Glove Liners Are Made.

1. The liner is too thick for the outer glove

A heavier knit feels pleasant in the hand, but inside a fitted work glove it fills the space the hand needs. The outer glove becomes tight, fingers lose movement and users take the liner out.

How to avoid it: always fit the liner inside the outer glove your customer actually uses. If you sell both, approve them as a pair. If the liner is sold separately, say in the brief which outer gloves it should fit under and test at least the tightest one.

2. Fingertip bunching

When liner fingers are longer than the outer glove fingers, the extra knit folds at the tips. It feels like a lump under the fingertip and makes small tasks harder.

How to avoid it: agree finger lengths per size from your size chart and check them with the liner worn inside the outer glove. Compare the smallest and largest sizes as well as the middle one.

3. Thumb too short or set in the wrong place

If the thumb is short or sits too far towards the palm, the liner pulls across the web of the hand when gripping. The knit then stretches thin there and wears out first.

How to avoid it: grip a tool or handle while wearing the sample and watch the thumb crotch. The knit should follow the hand without strain.

4. Rib cuff too loose, too tight or too short

A loose rib slides down and leaves a gap between liner and sleeve. A tight one marks the wrist. A cuff that is too short does not overlap the outer glove cuff, so the layers separate when the arm moves.

How to avoid it: agree the cuff length and relaxed opening per size, and check the overlap with the outer glove and a jacket sleeve. Pull the liner on and off repeatedly and see whether the rib recovers.

5. Pilling, stretching and shape loss

Knitted liners rub inside another glove all day. Depending on yarn and knit density, the surface can pill, the fingers can stretch and the cuff can lose recovery. A swatch will not show this.

How to avoid it: wear-test the approved sample inside the outer glove for several working sessions. If the liner will carry washing instructions, wash it according to the intended care label and measure it before and after. Print only care instructions you have checked.

6. Warmth claims that have not been tested

A close, soft knit looks warm, but appearance does not establish insulation or a cold rating. Buyers sometimes print warmth claims on packs that nobody has tested.

How to avoid it: describe the liner by what has been agreed: yarn composition, knit and fit. If your market needs a tested cold rating, include that requirement in the brief so testing can be planned. For insulated work gloves, see our winter work gloves buyer’s guide.

7. Mixed-up sizes in the carton

Knitted liners in one colour look almost the same across sizes. Without clear size identification, pairs get mixed during packing or in the store.

How to avoid it: agree how each size is identified, for example a size label or marking on the pack, and check pairs during packing.

Problem and prevention table

Problem Usual cause What to agree before bulk
Outer glove too tight Knit too heavy for the outer glove Fit test inside the real outer glove
Fingertip bunching Liner fingers too long Finger lengths per size, checked as a system
Strain at the thumb Short or misplaced thumb Grip test on the sample
Cuff slides or marks Rib length and opening not specified Cuff length, opening and overlap per size
Pilling, stretching Yarn and density not wear-tested Wear test, and wash test if care is printed
Unsupported warmth claims Claim printed without tests Only agreed facts on the pack
Mixed sizes No size identification Size label or pack marking

Sample approval checklist

  • Liner fitted alone and inside the intended outer glove.
  • No fingertip bunching; thumb follows the grip.
  • Cuff overlap checked with the outer glove and a sleeve.
  • Yarn composition, knit density and colour written down.
  • Smallest and largest sizes fitted on real hands.
  • Size identification, labels and pair packs approved.

Develop knitted glove liners for your label

ZESTLET makes gloves and apparel in Sialkot, Pakistan for brands, shops and distributors.

  • Small batches for new lines and test orders
  • Sample first, fitted inside your outer glove before bulk
  • Private label: your labels, colours and pair packs

See the Knitted Glove Liners or request a quote with your sizes and quantities.

Frequently asked questions

Why do glove liners bunch at the fingertips?

Usually the liner fingers are longer than the outer glove fingers. Agree finger lengths per size and check the liner inside the outer glove.

Can a liner make my work glove too tight?

Yes, if the knit is too heavy for the space inside. Fit the liner and outer glove together before approving the sample.

Are knitted liners warm?

That depends on yarn, knit and the outer glove. Appearance alone does not establish insulation; plan testing if you need a cold rating.

Can knitted liners be washed?

It depends on the final yarn. Wash-test the approved sample according to the intended care label before printing instructions.

Can I order liners under my own brand?

Yes. ZESTLET develops them under your label with authorized labels, colours and pair packaging after sample approval.

↑ZESTLET compliance document
Scroll to Top