ZESTLET · OEM / ODM · Private Label
Over-Mittens: 6 Problems with Sizing over Inner Gloves, Thumb, Gauntlet and Pack Size (and How to Avoid Them)
Build Now, Pay Later · New brands welcome
Launch your brand from 20 pieces. Pay the balance after your stock arrives.
ZESTLET makes your tactical, hunting, uniform and Highland products under your own label. Your first sample and branding setup are free, and orders from $5,000 can pay 60% after delivery.
Budget under $5,000
Startup Launch
- Start from 20 pieces per product
- Your first sample is free
- Labels, screens and digitising are free
- Bulk starts only after you approve the sample
Orders from $5,000
Build Now, Pay Later
- Pay 40% to start production
- Pay the other 60% monthly after delivery
- No interest and no application fee
- Your limit grows with every on-time payment
Your full journey with ZESTLET, step by step
From your first idea to stock in your warehouse. Every step is visible in your free brand dashboard.
- 1Create your free brand accountSign up in about one minute. We email you a 6-digit code to confirm your account.
- 2Check your credit in 30 secondsAnswer 3 short questions in your dashboard and see your pre-qualified credit limit straight away.
- 3Start your projectUpload your design or tech pack, choose the product and quantity. You can start from 20 pieces per product.
- 4Get your quotation within 24 hoursPrice per piece, lead time and payment terms in writing, from real people in Sialkot.
- 5Free sample with your brandingWe make your sample with your logo in 7–10 working days. You only pay the sample shipping.
- 6Approve and pay 40%Bulk production starts only after you approve the sample and pay the 40% deposit.
- 7Production and quality checksCutting, stitching, inspection and packing, with progress updates in your dashboard.
- 8Delivery, then pay 60% monthlyDoor-to-door shipping. Credit orders pay the balance after delivery over 90 to 365 days, with no interest.
What you need to apply
- Your brand name and contact details
- Your product idea, design or tech pack
- An order value from $5,000 for Build Now, Pay Later
- For higher limits: sales history or business registration
Your credit limit grows with you
First credit order
After 2 orders paid on time
After 4 cycles and a review
- Deposit
- 40%
- Balance after delivery
- 60%, monthly
- Repayment
- 90 to 365 days
- Interest and fees
- None
Can I start a clothing brand with a small budget?
Yes. You can start from 20 pieces per product, and your first sample and branding setup are free, so your budget goes into product.
Who can use Build Now, Pay Later?
Brands with orders from $5,000, including new brands with no sales history, after a short review. You pay 40% upfront and 60% in monthly instalments after delivery.
Is the sample free?
Yes, the first sample is made free with your branding. Sample shipping is paid by the buyer.
Credit is subject to approval. Amounts shown in your local currency are approximate.

Outer-shell over-mittens are a simple idea: a lightweight woven shell with a shared finger chamber, a separate thumb, a reinforced palm and a long gauntlet that closes with a drawcord and a small toggle. The wearer pulls them on over another glove when the weather turns or the job gets wetter or dirtier. Because they are worn over something else, most problems with over-mittens come from sizing and specifying them as if they were a stand-alone glove.
This article is for brand owners, outdoor and workwear shops and buyers developing their own over-mittens. Here are the six problems we see most often at sample stage and how to avoid them.

Problem 1: The over-mitten was sized without the inner glove
An over-mitten that fits a bare hand will be too tight over a work glove or a liner. The fingers are squeezed together, warmth drops because the layers are compressed, and pulling the mitten on and off becomes a struggle.
How to avoid it: decide which inner glove your customers will wear underneath, and measure and fit the over-mitten with that glove in place. If several inner gloves are possible, fit the sample over the bulkiest one you intend to support.
Problem 2: The finger chamber is too big and the thumb sits in the wrong place
The opposite mistake is a finger chamber with too much volume. The hand slides around inside, grip becomes clumsy and the thumb no longer lines up with the inner glove’s thumb. Wearers then feel they are fighting the mitten every time they pick something up.
How to avoid it: confirm finger-chamber volume and thumb alignment on the sample with the intended inner glove. Close the hand around the handles your customers use and check that the thumb reaches its tip without twisting. For more on thumb position in mittens, see our article on common work mitten problems.
Problem 3: The palm reinforcement is in the wrong place
The black woven shell has a separate plain palm reinforcement panel. If that panel is too small, wear reaches the lighter shell fabric; if it is too large or stiff, the mitten loses its packable, lightweight character.
How to avoid it: specify the reinforcement area separately from the shell, based on where your customers’ hands actually rub: rope, tool handles, ski poles or a steering wheel all wear different zones. Approve the panel size on the physical sample.
Problem 4: The gauntlet does not work with the jacket
A long gauntlet opening with a drawcord and a small toggle should close the gap between mitten and sleeve. If it is too narrow it will not go over a jacket cuff; if the toggle is too small or the cord too short, it cannot be operated while wearing gloves.
How to avoid it: try the sample with the jacket it will be worn with. Check jacket overlap with the arm extended, and tighten and release the drawcord using gloved hands. If it takes two attempts, change the toggle or cord before bulk.
Problem 5: Pack size was never specified
Over-mittens are often carried in a pocket or a pack until needed. If pack size is not written into the specification, a heavier shell, a lining or a bulky reinforcement can quietly turn a stowable mitten into one that does not fit the pocket it was designed for.
How to avoid it: specify the pack size independently of the reinforcement area, for example the folded dimensions or the pocket it must fit, and check it on the sample after the lining decision has been made.
Problem 6: Assuming the shell is waterproof
A smooth, matte woven shell can look weatherproof. Shell appearance does not establish waterproofness or a cold-protection rating, and this reference declares neither. If you want to make such claims, they need their own material choice, feasibility check and test confirmation before they appear on hang cards or product listings.
Sample checklist for over-mittens
| Check | How | Approve when |
|---|---|---|
| Fit over inner glove | Wear over the intended inner glove | On and off easily, fingers not compressed |
| Finger chamber | Grip real handles | No excess volume, hand does not slide |
| Thumb | Close the hand, check thumb tip | Aligned with the inner glove’s thumb |
| Palm reinforcement | Compare panel with real wear zones | Covers the contact area without stiffening the mitten |
| Gauntlet | Wear with the jacket, arm extended | Overlaps the sleeve, drawcord works with gloves on |
| Pack size | Fold and stow as specified | Fits the agreed pocket or dimensions |
| Claims | Check packaging text | No unconfirmed waterproof or cold-protection claims |
For shell, palm and sizing choices, read our over-mittens buyer’s guide. To see where each check happens in production, read how over-mittens are made.
Develop your own over-mittens with ZESTLET
ZESTLET is a glove and apparel manufacturer in Sialkot, Pakistan. We develop private-label over-mittens from your brief and confirm fit over your inner glove on a physical sample first.
- Shell fabric, finish and any lining to your approval
- Palm reinforcement area and pack size specified separately
- Gauntlet, drawcord and toggle to your specification
- Small batches welcome, sample first, private label
See the outer-shell over-mittens or request a quote with your drawing and size breakdown.
FAQ
What is the most common mistake with over-mittens?
Sizing them without the inner glove. Fit and measure the over-mitten with the glove your customers will wear underneath.
Why does my over-mitten feel clumsy?
Usually the finger chamber has too much volume or the thumb does not line up with the inner glove. Check both on the sample while gripping real handles.
Are outer-shell over-mittens waterproof?
Shell appearance does not establish waterproofness or a cold-protection rating, and this reference declares neither. Such claims need their own feasibility check and test confirmation.
How do I make sure the drawcord is usable?
Tighten and release it on the sample while wearing gloves. If it is awkward, change the toggle or cord before bulk production.
What should I send for a quotation?
Your drawing, intended task, material preference, intended inner glove, size breakdown, quantity, destination and authorised artwork. Sample cost, MOQ, lead time and freight are confirmed in the written quotation.
