ZESTLET · OEM / ODM · Private Label

Garment Measurement Spec Sheet: Points of Measure, How to Measure and Tolerances

Build Now, Pay Later · New brands welcome

Launch your brand from 20 pieces. Pay the balance after your stock arrives.

ZESTLET makes your tactical, hunting, uniform and Highland products under your own label. Your first sample and branding setup are free, and orders from $5,000 can pay 60% after delivery.

Budget under $5,000

Startup Launch

  • Start from 20 pieces per product
  • Your first sample is free
  • Labels, screens and digitising are free
  • Bulk starts only after you approve the sample

Orders from $5,000

Build Now, Pay Later

  • Pay 40% to start production
  • Pay the other 60% monthly after delivery
  • No interest and no application fee
  • Your limit grows with every on-time payment

Your full journey with ZESTLET, step by step

From your first idea to stock in your warehouse. Every step is visible in your free brand dashboard.

  1. 1Create your free brand accountSign up in about one minute. We email you a 6-digit code to confirm your account.
  2. 2Check your credit in 30 secondsAnswer 3 short questions in your dashboard and see your pre-qualified credit limit straight away.
  3. 3Start your projectUpload your design or tech pack, choose the product and quantity. You can start from 20 pieces per product.
  4. 4Get your quotation within 24 hoursPrice per piece, lead time and payment terms in writing, from real people in Sialkot.
  5. 5Free sample with your brandingWe make your sample with your logo in 7–10 working days. You only pay the sample shipping.
  6. 6Approve and pay 40%Bulk production starts only after you approve the sample and pay the 40% deposit.
  7. 7Production and quality checksCutting, stitching, inspection and packing, with progress updates in your dashboard.
  8. 8Delivery, then pay 60% monthlyDoor-to-door shipping. Credit orders pay the balance after delivery over 90 to 365 days, with no interest.

What you need to apply

  • Your brand name and contact details
  • Your product idea, design or tech pack
  • An order value from $5,000 for Build Now, Pay Later
  • For higher limits: sales history or business registration

Your credit limit grows with you

Starter$5,000 – $15,000
First credit order
Growth$15,000 – $50,000
After 2 orders paid on time
Scale$50,000+
After 4 cycles and a review
Deposit
40%
Balance after delivery
60%, monthly
Repayment
90 to 365 days
Interest and fees
None
Can I start a clothing brand with a small budget?

Yes. You can start from 20 pieces per product, and your first sample and branding setup are free, so your budget goes into product.

Who can use Build Now, Pay Later?

Brands with orders from $5,000, including new brands with no sales history, after a short review. You pay 40% upfront and 60% in monthly instalments after delivery.

Is the sample free?

Yes, the first sample is made free with your branding. Sample shipping is paid by the buyer.

Credit is subject to approval. Amounts shown in your local currency are approximate.

Garment Measurement Spec Sheet: Points of Measure, How to Measure and Tolerances

Quick answer: A measurement spec sheet lists every point of measure (POM) for a garment, how to measure it, the target value for each size and the allowed tolerance. Factories cut and check production against it. For tees and hoodies, the core POMs are chest width, body length, shoulder, sleeve length, armhole, hem and neck, usually with ±1 cm tolerance on large points and ±0.5 cm on small ones.

Key points of measure for a tee or hoodie

Code Point of measure How to measure (flat) Typical tolerance
A 1/2 chest 2.5 cm below armhole, side to side ±1 cm
B Body length High point shoulder to hem ±1 cm
C Shoulder width Seam to seam ±0.5 cm
D Sleeve length Shoulder seam to cuff edge ±1 cm
E Armhole (straight) Shoulder point to underarm ±0.5 cm
F 1/2 hem Edge to edge, relaxed ±1 cm
G Neck width Seam to seam at HPS ±0.5 cm
H Cuff opening Edge to edge, relaxed ±0.5 cm

How to measure correctly

  • Lay the garment flat on a table, smooth but not stretched.
  • Use a flexible tape measure in centimetres.
  • Measure ribs relaxed unless the sheet says “extended”.
  • Measure the same garment twice; if results differ, your measuring method is not clear enough.
  • Add a sketch with each POM marked by its code.

Grading between sizes

Grading is the increase or decrease between sizes. A common tee grade is 2–2.5 cm on 1/2 chest per size, 1–1.5 cm on body length and 0.5–1 cm on sleeve. Keep grades consistent; irregular jumps cause one size to fit oddly.

Spec sheet mistakes to avoid

  1. Giving full chest on one style and 1/2 chest on another without saying so.
  2. Missing tolerances, which leaves the factory to decide.
  3. Not stating whether measurements are before or after washing.
  4. Changing measurements by email without updating the sheet version.

Spec sheets at ZESTLET

ZESTLET can build the measurement sheet from your reference garment and checks bulk against it, for runs from 20 pieces per product.

Frequently asked questions

What is a POM in fashion?

A point of measure: a defined spot on a garment, such as 1/2 chest or body length, with a measuring method and target value.

What tolerance is normal for garments?

Around ±1 cm for large measurements and ±0.5 cm for small ones like neck or cuff.

Is chest measured full or half?

Factories usually measure 1/2 chest flat; always state which one your sheet uses.

Do I need a spec sheet for a small order?

Yes; without it there is no objective way to check or dispute measurements.

Related guide: Low-MOQ streetwear manufacturing with flexible payment terms

Need help with your spec sheet? Send your reference garment or sketch to sales@zestlet.com

↑ZESTLET compliance document
Scroll to Top